1989 Austin Mini 1000 City E

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear both rear lamp showing white light

Main beam tell-tale not working (4.9.1 (a) (ii))

Nearside Rear Seat belt buckle missing (7.1.2 (d))

Nearside Rear Seat belt missing (7.1.2 (a))

Offside Rear Seat belt buckle missing (7.1.2 (d))

Offside Rear Seat belt missing (7.1.2 (a))

Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Rear fog lamp switch missing (4.5.3 (a) (ii))

Rear fog lamp tell-tale missing (4.9.1 (a) (ii))

Indicator tell-tale inoperative (4.9.1 (a) (i))

Rear both rear lamp showing white light

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

surface corrosion on rear sub frame

Battery insecure (1.9.1)

Direction indicators not working (1.4.A.2c)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp aim not tested (1.8.A.1c)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp not working (1.3.2b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

rear exhaust support bracket missing

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Rear fog lamp not working (1.3.2b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

front brake discs pitted.

rear subframe corroded.

Driver's seat insecure (6.2.A.1)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Hazard warning tell tale not working correctly (1.4.B.1e)

Horn not working (1.6.2a)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp not working (1.3.2b)

Rear fog lamp switch faulty (1.3.1a)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

drivers door has a big corrosion hole in the outter door skin

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear fog lamp not working (1.3.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside outer track rod end joint cover split/missing

drivers seat securing catch ineffective

indicator/horn/wiper switch not totally secure, but adequate for full operational control

Horn control insecure (1.6.1)

Horn not working (1.6.2a)

Indicator switch insecure (1.4.A.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside outer track rod end joint cover split/missing

drivers seat securing catch ineffective

Nearside Steering rack gaiter split (2.2.D.2d)