1989 Fiat Panda

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Coolant leak ()

Nearside Play in steering rack inner joint(s) ()

Vehicle structure is corroded but structural rigidity is not significantly reduced all of underside / floorpan (6.1.1 (c) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside / floorpan (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside / floorpan (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Headlamp are incorrectly positioned Bulb ? (4.1.4 (a))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front doors corroded .covered with tape no sharp edges

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Bottom of doors rusty but not causing a projection

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Bottom of doors rusty but not causing a projection

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight leak from steering rack

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight leak from steering rack

Nearside Play in steering rack inner joint(s) ()

Nearside Front Subframe mounting prescribed area is excessively corroded sill end (2.4.A.3)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Subframe mounting prescribed area is excessively corroded sill end (2.4.A.3)

Nearside Play in steering rack inner joint(s) ()

Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Oil leak

Play in steering rack inner joint(s)

rear diff seal leaking

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Oil leak

Play in steering rack inner joint(s)

rear diff seal leaking

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front All position lamps not working (1.1.A.3b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear registration plate obscured (6.3.1d)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)