MOT Status
ExpiredMileage
80,236 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear brake binding (3.7.B.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear wheel bearing has slight play (2.6.2)
all front and rear suspension components are corroding but at the time of test was not excessive enough to fail
both front wiper blades are split but at the time of test cleared screen all ok
nearside and offside rear chassis rails are corroding but at the time of test was not excessive enough to fail
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear wheel bearing has slight play (2.6.2)
all front and rear suspension components are corroding but at the time of test was not excessive enough to fail
both front wiper blades are split but at the time of test cleared screen all ok
nearside and offside rear chassis rails are corroding but at the time of test was not excessive enough to fail
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Parking brake lever has no reserve travel (3.1.6b)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear wheel bearing has slight play (2.6.2)
n/s/f tyre has sidewall damage
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Exhaust has a major leak of exhaust gases (7.1.2)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
F82 BYC is a 1988 Mazda 121 in Red with a 1,324cc petrol engine. This vehicle has been through 10 MOT tests with a personal pass rate of 50%.
Across all 1988 Mazda 121 models, the average MOT pass rate is 64.2% with a typical mileage of 77,704 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying F82 BYC, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 38 years old, this Mazda 121 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of F82 BYC?
You can check the full history of F82 BYC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was F82 BYC registered?
F82 BYC is a 1988 Mazda 121, first registered on 1 August 1988.
Is F82 BYC safe to buy?
The MOT history for F82 BYC shows 10 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does F82 BYC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on F82 BYC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.