1989 Austin Mini Racing Flame

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill section (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill section (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Indicator switch faulty (1.4.A.1)

Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear wheel bearing has slight play (2.6.2)

Battery insecure (1.9.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Headlamp aim too low (1.8)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Rear wheel bearing has excessive play (2.6.2) DANGEROUS

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Oil leak

both front outer sill are corroded but are not in any prescribed areas

Offside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Brake pedal anti-slip provision missing (3.3.A.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Steering rack insecure (2.2.B.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Centre Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Sub-frame attachment bracket/mounting bolt missing (2.4.G.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Nearside Rear Rear position lamp(s) incomplete (1.1.4a)

Nearside Rear Rear reflector missing (1.5.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

corrosion in boot floor extends under spare wheel well.