1988 Austin Mini Designer

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear vallance (6.2.2 (d) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Obligatory mirror missing (3.3 (a))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Headlamp aim too high and too far to the right. (1.8)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Radius arm has excessive play in a pin/bearing pins seized both sides (2.4.G.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Brake cable has wires broken and is significantly weakened (3.5.1b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Hazard warning lamps inoperative (1.4.B.1b)

Horn not working (1.6.2a)

Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper not operating automatically when switched on (8.2.1b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate missing (6.3.1a)

Fuel pipe leaking (7.2.3)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Parking brake lever has no reserve travel (3.1.6b)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Rear registration plate missing (6.3.1a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)