2003 Mercedes-benz Vito

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Brake hose slightly damaged (3.6.B.4d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Play in steering rack inner joint(s)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front exhast hanger rubber missing.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Front exhast hanger rubber missing.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Rear Brake cable insecure (3.5.1d)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nail in offside rear tyre

Exhaust system not adequately supported (7.1.1)

Horn not working (1.6.2a)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

N/S Side step insecure

Headlamp aim not tested (1.8.A.1c)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

N/S Side step insecure

O/S/F sensor wire wrong side of roll bar

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Offside rear brake recording little or no effort (3.7.B.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)