2003 Land Rover Discovery

Coolant leak ()

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear rear light lens damaged

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Coolant leak ()

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

ALL SUSPENSION AND STEERING COMPPONENTS CORRODED

Front Coil spring corroded BOTH SIDES (5.3.1 (b) (i))

Front Oil leak, but not excessive FRONT AXLE (8.4.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material BOTH SIDES (1.1.11 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

ALL SUSPENSION AND STEERING COMPPONENTS CORRODED

Front Coil spring corroded BOTH SIDES (5.3.1 (b) (i))

Front Oil leak, but not excessive FRONT AXLE (8.4.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material BOTH SIDES (1.1.11 (c))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

boot step corroded and hole on the under side,

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake performance unable to be tested abs and stability control lights on (1.2.1 (g))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holed by suspension mounting point for radius arm (marked near hole with yellow chalk) (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

boot step corroded and hole on the under side,

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Headlamp aim not tested (4.1.2 (b))

Headlamp levelling device inoperative (4.1.5 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Fuel system component leaking excessively or a risk of fire dripping from rear of engine (6.1.3 (b) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' monitor (8.3.1e)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Trailer electrical socket deteriorated so that lead cannot be securely connected (1.9.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Offside Rear leak from axle oil seal

oil leak o/s/r axle oil seal

front rear track rod arm bent

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

front rear track rod arm bent

Nearside Front Ball joint has excessive play (2.2.B.1f)

Offside Headlamp aim too low (1.8)

Prop-shaft universal joint worn