2004 Iveco Daily 35S12 SWB

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion in various places not to excess monitor and repair

Central Front Exhaust has a major leak of exhaust gases emission not tested (6.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion in various places not to excess monitor and repair

Brake load sensing valve linkage obviously incorrectly adjusted LINKAGE BROKEN.NOT CONNECTED (1.1.17 (b))

Headlamp not working on dipped beam O/S FRONT DIP. (4.1.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Shock absorbers has an excessively worn bush N/S FRONT BOTTOM MOUNTING. (5.3.2 (c))

Suspension arm ball joint excessively worn O/S FRONT BOTTOM BALL JOINT. (5.3.4 (a) (i))

Body component likely to become detached REAR O/S AND N/S TIPPER BODY WINGS WELDING FRACTURED. (6.2.1 (a) (ii)) DANGEROUS

FAULTY DIP SWITCH.

Integral body structure is corroded but structural rigidity is not significantly reduced O/S SILL. (6.1.1 (c) (i))

Tyre worn close to legal limit/worn on edge O/S REAR INNER DUAL. (5.2.3 (e))

Brake load sensing valve inoperative (3.6.E.3)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Torque/reaction arm locating pin locking device missing (2.4.G.3b)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) insecure (1.1.A.3a)

Nail in offside rear tyre

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front position lamp(s) not working (1.1.A.3b)

Nail in offside rear tyre

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)