2003 Mazda MX-5

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened and rear and overall underside of vehicle including vehicle chassis (5.3.3 (b) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive and offside rear lower inner sills at jacking points (7.1.1 (a) (i))

offside rear inner wheel arch corroded

sill coverings are fitted unable to give correct inspection

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened and rear and overall underside of vehicle including vehicle chassis (5.3.3 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive and offside rear lower inner sills at jacking points (7.1.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

offside rear inner wheel arch corroded

sill coverings are fitted unable to give correct inspection

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Power steering pipe/hose leaking (2.1.5 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive both rear inner wheel arches (5.2.6)

Suspension arm corroded but not seriously weakened both front lower (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive both front chassis legs (2.4.A.3)

sill covers fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills (5.2.6)

Seat belt anchorage prescribed area is corroded but not considered excessive both rear inner wheel arches (5.2.6)

Suspension arm corroded but not seriously weakened both front lower (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive both front chassis legs (2.4.A.3)

sill covers fitted

Nearside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

Nearside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded (3.6.B.2c)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp damaged but light output not reduced (1.7.5a)

Exhaust has a minor leak of exhaust gases (7.1.2)

suspension lowered and weak

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Registration plate lamp not fitted (1.1.C.1b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)

all chassis corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both rear tyres have cuts in inner side wall but not deep enough to reach cords