2003 Subaru Impreza

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Undersurface, sills, sprayed underseal (6.2.2 (d) (i))

Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sills (6.2.2 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

offside front brake pipe corroded

rear brake pipes corroded

Nearside Headlamp insecure (4.1.1 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

offside front brake pipe corroded

rear brake pipes corroded

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear bumper support corroded

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))

Nearside Rear Brake hose slightly damaged (1.1.12 (b) (i))

Offside Rear Brake hose slightly damaged (1.1.12 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

rear exhaust slight fouling on rear

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Rear exhaust fouling on rear differential

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

FRONT BRAKE DISCS INNER FACES CORRODED

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Registration plate lamp not working (1.1.5c)