2004 Honda Civic

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Emissions not tested exhaust leak (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak exhaust rear back box connection (8.2.2.1 (b))

Headlamp aim so that beam "kick up" is not visible on the screen nearside front and offside front (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Position lamp not working offside front (4.2.1 (a))

Suspension arm pin or bush excessively worn offside front (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Coil spring corroded nearside rear and offside rear (5.3.1 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security nearside rear and offside rear (6.2.2 (d) (i))

Suspension arm pin or bush worn but not resulting in excessive movement nearside front lower (5.3.4 (a) (i))

Suspension component mounting prescribed area damaged but not considered excessive nearside rear and offside rear (5.3.6 (a) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt nearside front outer (2.1.3 (g) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt offside front outer (2.1.3 (g) (i))

Driver side Front Suspension arm pin or bush worn but not resulting in excessive movement

Driver side Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt

Passenger side Front Track rod end ball joint has slight play

Passenger side and Driver side Front & Rear Brake discs worn, but not excessively

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust has a minor leak of exhaust gases (7.1.2)

both rear tyres wearing on inner edge

engine management light on

rear brake discs corroded

Offside Front coil spring broken (2.4.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

both rear tyres wearing on inner edge

engine management light on

rear brake discs corroded

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front tyres worn inner edges

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front tyres worn inner edges

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres wearing on inner edge

slight blow on exhaust

Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has little reserve travel (3.1.6b)

both rear tyres wearing on inner edge

slight blow on exhaust

Nearside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight blow on exhaust

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight blow on exhaust

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

shallow cuts in nearside rear tyre

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nail in offside rear tyre

front tyres worn on edges

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside rear brake binding (3.7.B.1)

Nail in offside rear tyre

front brake discs worn/corroding edges

front tyres worn on edges

rear brake discs worn /corroding edges

rear brake pads very low