2001 Mazda MPV

headlight image faint - headlight lens weathered

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced box section from the sill to the subframe holed and corroded (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced box section from the sill to the subframe holed and corroded (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed and corroded (6.1.1 (c) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

headlight image faint - headlight lens weathered

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Fluid leak, but not excessive slight coolant leak (8.4.1 (a) (i))

exhaust joints corroded

Fluid leak, but not excessive slight coolant leak (8.4.1 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

exhaust joints corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' bushes (5.3.4 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' bushes (5.3.4 (a) (i))

Emissions not tested co and hc very high and popping from exhaust (8.2.1.2 (d))

Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt x2 (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

N/S/Rear tyre soft.

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

bad engine oil leak

Engine covers fitted obscuring some components in the engine bay

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Oil leak

both front tyres wearing inner edge

parking permit in zone b of windscreen

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)