2003 Renault Clio

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement mounting bush (5.3.4 (a) (i))

Nearside door mirror rear cover missing

Offside Rear Outer Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement mounting bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brake pipe excessively corroded beam pipe (1.1.11 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Rear Nail in tyre ()

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement mounting bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside door mirror rear cover missing

Offside Rear Outer Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement mounting bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

rear wiper torn

front brake discs corroded

Nearside rear brake binding (3.7.B.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake discs corroded

Offside headlamp aim poor

Nearside Stop lamp not working (1.2.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside headlamp aim poor

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside front tyre wearing on inside edge

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside front tyre wearing on inside edge

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

damage to n/s/f wheel outer rim

n/s/r tyre on 3mm

nail in n/s/r tyre

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

damage to n/s/f wheel outer rim

front discs look thin

front wipers starting to smear screan

n/s/r tyre on 3mm

nail in n/s/r tyre

unable to see brake fluid level

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pad(s) insecure (3.5.1g)

Offside Headlamp aim too high (1.8)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Registration plate lamp not working (1.1.5c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside front tyre is on 2mm

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside front tyre is on 2mm

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Windscreen wiper blade deteriorated (8.2.2)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)