2007 Mercedes-benz Vito

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting sill (6.1.6 (i) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member (6.1.6 (i) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Lower Suspension arm corroded and seriously weakened and holed (NOT TO BE WELDED) (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting area marked in yellow (5.3.6 (a) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting sill (6.1.6 (i) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm mounting point (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member (6.1.6 (i) (i))

Offside Side repeater incorrect colour (4.4.3 (a))

Rear Exhaust has a major leak of exhaust gases tail pipe section (6.1.2 (a))

Driver's seat insecure possible bolt loose? (6.2.5 (a) (ii)) DANGEROUS

Offside Rear Brake pipe corroded, covered in grease or other material into hose (1.1.11 (c))

no rear seat belts checked due to load

slight corrosion under side

Offside Rear Tyre slightly damaged/cracking or perishing Cracking on outer edge (5.2.3 (d) (ii))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect bulb fitted incorrectly (4.1.2 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint likely to become detached has become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill / jacking point (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer trailing arm mounting / inner sill (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill / jacking point (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer trailing arm mounting / inner sill (5.3.6 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis outrigger - jacking point (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis outrigger - jacking point (6.1.1 (c) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))

Towbar slightly corroded within 30cm of towbar mounting rear crossmember (6.1.6 (i) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis outrigger - jacking point (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis outrigger - jacking point (6.1.1 (c) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))

Towbar slightly corroded within 30cm of towbar mounting rear crossmember (6.1.6 (i) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mounting (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis legs (both) (5.3.6 (a) (i))

Rear Towbar slightly corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

fuel injector leaking cylinder compression

Emissions not tested (7.4.B.1)

Front Exhaust has a major leak of exhaust gases downpipe clamp broken (7.1.2)

Nearside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

fuel injector leaking cylinder compression

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill brace (5.2.6)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

nearside front tyre badlyscuffed

offsde front washer pipe split

offside rear tyre between 2 and 3m