MOT Status
ExpiredMileage
175,016 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))
Fuel Pipe/s corroded Filler pipes ()
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trail arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trail arm (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Central Rear Seat belt buckle missing (7.1.2 (d))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))
Fuel Pipe/s corroded Filler pipes ()
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trail arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trail arm (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened ALL (5.3.3 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened ALL (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Position lamp not working n/s and o/s (4.2.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
rear brakes 26% out of balance
rear suspension arms and subframe corroded
Front Windscreen wiper does not clear the windscreen effectively n/s and o/s (8.2.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Wheel nut(s) missing all four wheels (4.2.A.1e)
rear brakes 27% out of balance
rear subframe and suspension arms corroded
Brake vacuum build up slow (3.3.E.6)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Suspension arm damaged but not seriously weakened upper and lower n/s and o/s (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (2.4.A.3)
front and rear sub frames corroded slightly
Brake vacuum build up too slow (3.3.E.6)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Windscreen wiper does not clear the windscreen effectively n/s and o/s (8.2.2)
Rear Suspension arm corroded but not seriously weakened n/s and o/s upper and lower (2.4.G.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (2.4.A.3)
front and rear subframes corroded
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front tyre wearing on outer edge
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear subframe corroding
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front tyre wearing on outer edge
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear subframe corroding
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FD07 BKU is a 2007 Mazda 6 in Silver with a 1,998cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying FD07 BKU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FD07 BKU?
You can check the full history of FD07 BKU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FD07 BKU registered?
FD07 BKU is a 2007 Mazda 6, first registered on 18 May 2007.
Is FD07 BKU safe to buy?
The MOT history for FD07 BKU shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FD07 BKU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FD07 BKU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.