2007 Citroen Relay

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Other passenger door does not latch securely closed side door (6.2.3 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement Both front wishbone rear bushes (5.3.4 (a) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive Both rear inner sills (5.3.6 (a) (i))

offside front sill corroded outside prescribed areas

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear floor (5.3.6 (a) (i))

offside front sill corroded outside prescribed areas

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

exhaust rubbers deteriorated

Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear fog lamp does not emit a steady red light (1.3.2e)

Front Brake pad(s) wearing thin (3.5.1g)

offside rear floor been cut but not affecting vehicle structure and not considered a reason for rejection

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

engine light on

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

engine check light on