MOT Status
ExpiredMileage
144,410 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Suspension rod corroded and seriously weakened (5.3.3 (b) (i))
Windscreen washer not working (3.5 (a))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe slightly damaged (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
abs pump corroded
Horn not working (7.7 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Seat belt not functioning as intended (7.1.2 (c))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
abs pump corroded
Brake pipe excessively corroded both sides front to rear (1.1.11 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim not tested (4.1.2 (b))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear both sides shocks corroded
Nearside Brake pipe corroded, covered in grease or other material front to joint (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear both sides shocks corroded
Offside Rear reflector missing (4.8.2 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Brake pipe corroded, covered in grease or other material front to joint (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear both sides shocks corroded
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Outer Tyre worn close to the legal limit (4.1.E.1)
Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)
Offside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Outer Tyre worn close to the legal limit (4.1.E.1)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
rear parking brake recording little or no effort (3.7.B.6a)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
n/s mirror cracked
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
n/s mirror cracked
Nail in nearside rear tyre
Front Brake pad(s) wearing thin (3.5.1g)
Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FD08 PYH is a 2008 Vauxhall Vivaro in White with a 1,995cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2008 Vauxhall Vivaro models, the average MOT pass rate is 66.7% with a typical mileage of 110,885 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying FD08 PYH, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 18 years old, this Vauxhall Vivaro is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FD08 PYH?
You can check the full history of FD08 PYH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FD08 PYH registered?
FD08 PYH is a 2008 Vauxhall Vivaro, first registered on 26 June 2008.
Is FD08 PYH safe to buy?
The MOT history for FD08 PYH shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FD08 PYH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FD08 PYH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.