2012 Toyota Auris

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear shocker coroded

under body coroded

Front subframe corroded

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides inner sill (5.3.6 (a) (i))

Rear axle corroded

Rear exhaust shield loose

Offside Front Inner Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front subframe corroded

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides inner sill (5.3.6 (a) (i))

Rear axle corroded

Rear exhaust shield loose

Nearside Rear brake back plate corroded

Offside Rear Brake pipe corroded, covered in grease or other material corroded from flexi (1.1.11 (c))

Offside Rear brake back plate corroded

Nearside Front Suspension arm pin or bush excessively worn rearmost det (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear brake back plate corroded

Offside Rear Brake pipe corroded, covered in grease or other material corroded from flexi (1.1.11 (c))

Offside Rear brake back plate corroded

Rear Windscreen wiper blade defective torn (3.4 (b) (i))

Rear exhaust hanging bracket corroded off insecure

Both rear back plates corroded.

Exhaust mounting defective Rear back box. (6.1.2 (a))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Wearing on inner edge. (5.2.3 (e))

Exhaust mounting defective back box (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Exhaust mounting defective back box (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Exhaust shield missing where fitted as original equipment creating a risk of fire below fuel tank (6.1.3 (e)) DANGEROUS

Exhaust mounting defective back box (6.1.2 (a))

Exhaust mounting defective Rear back box. (6.1.2 (a))

Rear exhaust heat sheild in-secure.

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear tyre has a cut in sidewall but not showing cords