2003 Fiat Doblo

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Underside of vehicle corroding

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Underside of vehicle corroding

Both front tyres worn on inner edge

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases front flexi near hangar (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing cracking (5.2.3 (d) (ii))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and underside components (6.1.1 (c) (i))

Emissions not tested due to excessive blow (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases front cat pipe (6.1.2 (a))

Front Headlamp light intensity severely reduced both sides (4.1.4 (a))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing cracking (5.2.3 (d) (ii))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis and underside components (6.1.1 (c) (i))

Front headlights slightly deterioted

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Both rear tyres perishing

Offside front tyre worn on inner edge

Both front tyres wearing on edges

Both rear tyres perishing

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement front bush (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Both front tyres wearing on edges

Both rear tyres perishing

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Headlamp deteriorated but light output not reduced (1.7.5a)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Headlamp insecure (1.7.3)

Headlamp deteriorated but light output not reduced (1.7.5a)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

BRAKE DISCS BECOMING PITTED ON INNER BRAKE SURFACE.

Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)