2009 Ford Ka

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Items removed from driver's view prior to test ()

Suspension arm corroded but not seriously weakened Rear axle (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Items removed from driver's view prior to test ()

Suspension arm corroded but not seriously weakened Rear axle (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Macpherson strut pin or bush excessively worn Top mount (5.3.4 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Engine sump corroded and oily

Items removed from driver's view prior to test ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust has a minor leak of exhaust gases Silencer join (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Brake pad(s) wearing thin front (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge worn to 1.6m (5.2.3 (e))

Offside Rear suspension bump stop insecure

Nearside Rear Brake cable insecure (1.1.15 (c))

Brake pad(s) wearing thin front (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge worn to 1.6m (5.2.3 (e))

Offside Rear suspension bump stop insecure

Nearside Front headlamp lens deteriorated

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front headlamp lens deteriorated

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

front exhaust hanger snapped(still secure)

rear silencer outer casing rusted

Nearside Front Front position lamp(s) missing (1.1.A.3a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front exhaust hanger snapped(still secure)

rear silencer outer casing rusted

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Nearside Headlamp aim too high (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)