2010 Yamaha Wr 125 X

gear shifter loose

Horn not working (7.7 (a))

gear shifter loose

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Footrest missing (6.2.12 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front All direction indicators incorrect colour (4.4.3 (a))

Front Stop lamp emits other than a steady red light (4.3.3 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Throttle operating incorrectly (6.2.7 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Handlebar grip insecure to handlebar (2.2.1 (d) (ii))

Exhaust noisy BAFFEL FITTED (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Offside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Headlamp aim too high (1.6)

Drive chain worn but not considered excessive (6.2.1e)

Front brake master cylinder damaged.

Front suspension assembly slightly corroded. fork tube. (2.3.1)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering headbearing has slight free play (2.2.2)

Exhaust noisy (7.1.2)

Drive chain worn to excess (6.2.1e)

Rear Footrest missing (6.2.1a)

Exhaust noisy (7.1.2)

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate characters laid out in an incorrect format (6.3.4f)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)