2003 Peugeot Boxer

Horn not working (7.7 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Windscreen in an unacceptable condition (3.2 (c) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear box section for spare wheel carrier corroded

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front tyre at 2.mm

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front tyre at 1.8 mm

Central Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear rear brake recording little or no effort both sides (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front tyre at 2.mm

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp aim too high and too far to the left. (1.8)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

offside outer sill corroded but not in prescribed area

offside front inner wheel arch holed and rusty.

steering column boot split.

Battery insecure (1.9.1)

offside front inner wheel arch holed and rusty.

steering column boot split.

Nearside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Brake load sensing valve stiff (3.6.E.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

battery insecure which will fail on next MOT

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp insecure (1.7.3)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Stop lamp not working (1.2.1b) DANGEROUS

Offside Stop lamp not working (1.2.1b) DANGEROUS

Brake load sensing valve stiff (3.6.E.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

battery insecure which will fail on next MOT

offside front coil spring top mount bearing seized

(1) Offside rear tyre worn down to legal limit.

BOTH FRONT BRAKE DISCS SLIGHTLY WORN AND CORRODED

BOTH FRONT OUTER C/V BOOTS SLIGHTLY PERRISHED

FRONT BRAKES SLIGHTLY OUT OF BALANCE

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front front brake recording little or no effort (3.7.B.5a)

BOTH FRONT OUTER C/V BOOTS SLIGHTLY PERRISHED

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside front brake binding (3.7.B.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Brake load sensing valve linkage stiff (3.6.E.3)