2003 Ford Ka

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Inner Subframe mounting prescribed area is inadequately repaired repair plate not fully welded to car (2.4.A.3)

Nearside Rear Outer Subframe mounting prescribed area is inadequately repaired repair plate only spot welded on (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Outer Subframe mounting prescribed area is inadequately repaired seal only spot welded on not continuous weld and not fully welded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is inadequately repaired not fully welded inner seal (2.4.A.3)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too high (1.8)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front coil spring fractured (2.4.C.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear coil spring fractured (2.4.C.1a)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)