2004 Lexus IS200

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Driver's door hinge insecure (6.2.3 (c) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Position lamp not working both sides (4.2.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Just before arch and below door. (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule Both rears. (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Headlamp aim projected beam image is obviously incorrect Maybe polishing or new headlights. (4.1.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm 215/45r17 (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Just before arch and below door. (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge Needs doing ASAP. (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule Both rears. (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp light intensity severely reduced both side (4.1.4 (a))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front wheel has limited free movement

Nearside Front wheel has limited free movement

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits due to rear exhaust leak (7.3.D.3)

Headlamp excessively deteriorated so that the light output is severely reduced both side (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

possible power steering pump problem

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Front Shock absorber has a light misting of oil (2.7.3)

General corrosion under vehicle.

Rear Anti-roll bar slightly distorted (2.4.G.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

off side front and off side rear tyre wearing from inner edge

Front Shock absorber has a light misting of oil (2.7.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

General corrosion under vehicle.

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Anti-roll bar slightly distorted (2.4.G.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

off side front and off side rear tyre wearing from inner edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)