2005 Mazda 6

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Offside Rear bumper damaged

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension component corroded but not seriously weakened all components (5.3.3 (b) (i))

Rear subframe/trailing arm bushes slight play

both sills undersealed

fuel pipes corroded

underside of vehicle corroded

Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Upper Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Within 30 cm of load bearing area (axle mounting.) marked in yellow. (6.1.1 (c) (i))

Lower Underneath car has multiple areas of corrosion.

Nearside Lower Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Fuel Pipe/s corroded Filler neck. ()

Exhaust system corroded joints

Fuel filler neck pipe corroded

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge Treads- 3.0mm (5.2.3 (e))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement

Offside Front Nail in tyre ()

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement

Underbody corrosion

Brake slack adjuster advise adjustment handbrake/parkbrake needs adjustment (1.1.18 (a))

Items removed from driver's view prior to test sat nav holder ()

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced floor panels and chassis rails have surface rust (6.1.1 (c) (i))

Nearside Front Headlamp lens slightly defective tarnished (4.1.1 (b) (i))

Nearside Front Lower Shock absorbers has slight external damage to the casing mounting bush worn (5.3.2 (b))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Shock absorbers has slight external damage to the casing mounting bush worn (5.3.2 (b))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake slack adjuster advise adjustment handbrake/parkbrake needs adjustment (1.1.18 (a))

Items removed from driver's view prior to test sat nav holder ()

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced floor panels and chassis rails have surface rust (6.1.1 (c) (i))

Nearside Front Headlamp lens slightly defective tarnished (4.1.1 (b) (i))

Nearside Front Lower Shock absorbers has slight external damage to the casing mounting bush worn (5.3.2 (b))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Shock absorbers has slight external damage to the casing mounting bush worn (5.3.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill panel (6.1.1 (c) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

corrosion and pitting to front brake discs

under-tray fitted

underside corrosion to body and chassis

Nearside Front position lamp(s) not working (1.1.A.3b)

corrosion and pitting to front brake discs

under-tray fitted

underside corrosion to body and chassis

rear brake pads getting worn

Nearside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)