2006 Toyota Aygo

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner wall (5.2.3 (d) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front wind screen wiper smears slight

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge NSF, NSR and OSR all 3mm (5.2.3 (e))

Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

coolant level low on inspection

Nearside Front Headlamp aim not tested due to bulb not working (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

coolant level low on inspection

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

noise from nearside rear bearing