2006 Mazda MX-5

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Rear Floor to Sill (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear Floor to Sill (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Rear Floor to Sill (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear Floor to Sill (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced floor to sill (6.1.1 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced floor to sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Rear Exhaust has a major leak of exhaust gases section (6.1.2 (a))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sills (6.1.1 (c) (i))

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

nearside wiper blade end split