2009 Fiat 500

Nearside Front Macpherson strut ball joint has slight play (5.3.4 (a) (i))

Offside Front Macpherson strut ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Coil spring corroded All 4 (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Macpherson strut corroded but not seriously weakened Poor (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Tyre has a bulge, caused by separation or partial failure of its structure all way round inner side wall (5.2.3 (d) (ii)) DANGEROUS

Coil spring corroded All 4 (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Macpherson strut corroded but not seriously weakened Poor (5.3.3 (b) (i))

Offside Front Tyre slightly damaged Heavy Splitting to inner tyre side wall, Very Poor, No cord's see time of test (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge 1.6/2mm On limit (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive From engine (8.4.1 (a) (i))

Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive From engine (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush. (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Worn edges (5.2.3 (e))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge Worn edges (5.2.3 (e))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Oil leak ()

both front top strut mounts have play

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

oil light flashing

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

oil light flashing

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)