2012 Yamaha Wr 125 X

Front Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement SWING ARM BUSHES (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Position lamp showing red light to the front (4.2.3 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement SWING ARM BUSHES (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel spoke slightly loose (5.2.2 (d))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear All direction indicators obviously incorrectly positioned (4.4.3 (a))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.2.1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn to excess (6.2.1e)

Headlamp insecure (1.2.3b)

Horn not working (1.7.3a)

Indicator switch insecure (1.5.4)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Rear Direction indicator missing (1.5.1a)

Nearside Rear Footrest missing (6.2.1a)

Offside Front Direction indicator missing (1.5.1a)

Offside Rear Direction indicator missing (1.5.1a)

Offside Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Exhaust noisey

Gear lever loose

Steering headbearing has slight free play (2.2.2)

Bike presented for test with lights temporarily masked.Tested in accordance with daytime MOT requirements - implications explained to customer.

Front Brake hose slightly deteriorated (3.2.B3b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

L/H side panel insecure.

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Wheel alignment slightly misaligned. (2.5.1)

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Footrest missing (6.2.1a)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

L/H side panel insecure.

Front Brake hose slightly deteriorated (3.2.B3b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Wheel alignment slightly misaligned. (2.5.1)

Wheel alignment slightly misaligned. (2.5.1)