2003 Toyota Yaris

Radiator mounting broken

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both (4.7.1 (b) (ii))

Front Windscreen wiper blade defective Both (3.4 (b) (i))

Radiator mounting broken

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by trail arm mount (5.3.6 (a) (i))

Nearside Rear trye worn inner edge

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by trail arm mount (5.3.6 (a) (i))

damage to osf bumper

Front registration plate deteriorated but not likely to be misread damaged but visable (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by axle pivot (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by axle pivot (2.4.A.3)

Nearside Headlamp aim beam image obviously incorrect outer lens opaque (1.8.A.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Headlamp aim beam image obviously incorrect outer lens opaque (1.8.A.1b)

Front registration plate deteriorated but not likely to be misread damaged but visable (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by axle pivot (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill by axle pivot (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tyre worn close to the legal limit possible stepped tread type (4.1.E.1)

Nearside Rear perishing sidewall

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit possible stepped tread type (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Tyre worn close to the legal limit possible stepped tread type (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear perishing sidewall

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre worn close to the legal limit possible stepped tread type (4.1.E.1)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Front discs worn

Offside rear tyre perishing

Centre Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)