2004 Honda Jazz

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Fuel Pipe/s corroded

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Fuel Pipe/s corroded

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Fuel Pipe/s corroded

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Fuel Pipe/s corroded

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Rear Shock absorbers has light misting of oil both sides (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement front both sides (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear both sides (5.3.6 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Rear Shock absorbers has light misting of oil both sides (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement front both sides (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear both sides (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all steel pipes (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and rear both sides (5.3.6 (a) (i))

exhaust system is corroded

Brake pipe corroded, covered in grease or other material all steel pipes (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and rear both sides (5.3.6 (a) (i))

exhaust system is corroded

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced lip of sills to floor (6.1.1 (c) (i))

Front Brake pad(s) wearing thin ON LIMITS (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin ON LIMITS (1.1.13 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps BOTH (4.7.1 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule Both (1.1.12 (f) (i))

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear brake discs slighty corroded

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)