2006 Toyota Aygo

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement NS/OS (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced Outer Sill (6.1.1 (d) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Crash Bar (6.2.2 (d) (i))

Underbody Surface Corrosion Inc Suspension Components

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (6.1.1 (c) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases Backbox (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement NS/OS (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Crash Bar (6.2.2 (d) (i))

Underbody Surface Corrosion Inc Suspension Components

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Exhaust system insecure middle pipe bracket (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust mounting defective corroded (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Axle 2 (1.2.1 (b) (i))

Surface corrosion under vehicle

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Outer Tyre has a tear, caused by separation or partial failure of its structure Deep cracks (5.2.3 (d) (ii)) DANGEROUS

Front wiper splitting

Nearside Rear Brake pipe slightly corroded Main front to rear before flexi (3.6.B.2c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe slightly corroded Main front to rear before flexi (3.6.B.2c)

rear exhaust silencer mounting broken

Offside Registration plate lamp not working (1.1.C.1d)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust silencer mounting broken

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust mount broken

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

advise rear exhaust mount broken but still secure

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)