2008 Yamaha Yzf R125

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear All direction indicators light intensity significantly reduced (4.4.3 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Footrest slightly loose (6.2.12 (a))

Offside Front Footrest slightly loose (6.2.12 (a))

Chain guard slightly loose (6.1.7 (i))

Clutch lever locking nut missing

Cush drive rubbers worn

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Mudguard missing

Nearside Rear Direction indicator light intensity reduced (4.4.3 (a))

Nearside footrest slightly bent

Offside Front Footrest slightly loose (6.2.12 (a))

Offside Rear Direction indicator light intensity reduced (4.4.3 (a))

Offside footrest slightly bent

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pedal fouling fairing

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Chain guard slightly loose (6.1.7 (i))

Clutch lever locking nut missing

Cush drive rubbers worn

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Mudguard missing

Nearside Rear Direction indicator light intensity reduced (4.4.3 (a))

Nearside footrest slightly bent

Offside Front Footrest slightly loose (6.2.12 (a))

Offside Rear Direction indicator light intensity reduced (4.4.3 (a))

Offside footrest slightly bent

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pedal fouling fairing

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Footrest insecure (6.2.12 (a))

Offside Front Direction indicator missing (4.4.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Chain guard slightly loose (6.1.7 (i))

Clutch lever shortened (6.2.7 (b))

Front Brake hose slightly chafed (1.1.12 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

rear brake pedal fouling on fairing

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

indictor switch slightly insecure

rear number plate slightly insecure

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicator flashing more than 120 times per minute (1.5.1c)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Number plate light not working.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Number plate light not working.