2008 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill (7.1.1 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill (7.1.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

offside rear chassis and inner arch severely corroded outside prescribed area for test

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Spare wheel carrier insecure (6.1.5 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Passenger's seat insecure (6.2.6 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit 165/65r13 (4.1.E.1)

Nearside Rear parking brake cable insecure

Offside Front Outer Front constant velocity joint is slightly worn (2.5.C.1b)

both rear tyres cracked

Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Nearside Front Outer Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded axle mount (holed on inner sill) (2.4.A.3)

Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit 165/65r13 (4.1.E.1)

Nearside Rear parking brake cable insecure

Offside Front Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

both rear tyres cracked

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

slight damage n/s/r outer sill