MOT Status
ValidMileage
68,989 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Rear Coil spring corroded both coils (5.3.1 (b) (i))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Rear Coil spring corroded both coils (5.3.1 (b) (i))
Offside Outer Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security SILL (6.2.2 (d) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Outer Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security SILL (6.2.2 (d) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded both coils (5.3.1 (b) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded both coils (5.3.1 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Tyre tread depth below requirements of 1.6mm both sides (5.2.3 (e)) DANGEROUS
Oil leak, but not excessive (8.4.1 (a) (i))
Child Seat fitted not allowing full inspection of adult belt ()
Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside front & rear (5.3.6 (a) (i))
Tyre worn close to legal limit/worn on edge offside & nearside rear (5.2.3 (e))
Headlamp aim projected beam image is obviously incorrect offside & nearside (4.1.2 (c))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Suspension arm pin or bush excessively worn offside & nearside front lower (5.3.4 (a) (i))
Child Seat fitted not allowing full inspection of adult belt ()
Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside front & rear (5.3.6 (a) (i))
Tyre worn close to legal limit/worn on edge offside & nearside rear (5.2.3 (e))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Floors Both Side (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel Arch (6.1.1 (c) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt Clip (6.1.7 (g) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Floors Both Side (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel Arch (6.1.1 (c) (i))
Oil leak ()
Rear Body has slight corrosion boot floor (6.1.B.2)
both front tyre wearing excessively on inner edges
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has large hole and chassis cracking (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Rear Registration plate lamp not working (1.1.C.1d)
Oil leak ()
Rear Body has slight corrosion boot floor (6.1.B.2)
both front tyre wearing excessively on inner edges
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor (6.1.B.2)
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
BATTERY LIGHT ON DASH CONSTANTLY ON
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
BATTERY LIGHT ON DASH CONSTANTLY ON
Both rear tyres perished
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
offside front lower wishbone rear bush slightly worn
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FG06 BXY is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FG06 BXY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FG06 BXY?
You can check the full history of FG06 BXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FG06 BXY registered?
FG06 BXY is a 2006 Ford Ka, first registered on 14 April 2006.
Is FG06 BXY safe to buy?
The MOT history for FG06 BXY shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FG06 BXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FG06 BXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.