CarVerify

Free Car Check

FG06 CNC

2006 Mazda 5

Grey Diesel 1998cc
Search another vehicle

MOT Status

Expired
Expires27 Feb 2020
Tests15 (11 pass, 4 fail)
Pass rate73.3%

Mileage

158,065 mi
Last recorded158,065 miles
Recorded on27 Feb 2019
Typical for 2006 Mazda 575,810 mi

Significantly above average — investigate

4 checks still locked for this Mazda
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationFG06 CNC
MakeMazda
Model5
Year2006
ColourGrey
Fuel typeDiesel
Engine1,998cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

11 pass 4 fail
Pass 27 Feb 2019 158,065 miles

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

sill covers fitted

Fail 26 Feb 2019 158,064 miles

Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Offside Front Position lamp not working (4.2.1 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

sill covers fitted

Pass 27 Feb 2018 140,718 miles
Fail 27 Feb 2018 140,718 miles

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear coil spring broken (2.4.C.1a)

Pass 28 Feb 2017 123,026 miles

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Fail 27 Feb 2017 123,026 miles

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Pass 23 Feb 2016 116,312 miles
Fail 22 Feb 2016 116,312 miles

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Pass 18 Feb 2015 108,351 miles
Pass 28 Feb 2014 101,815 miles
Pass 27 Feb 2013 94,930 miles

Rear Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Pass 20 Feb 2012 86,438 miles

Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Pass 31 Jan 2011 76,254 miles

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

full engine cover fitted

Pass 1 Feb 2010 67,390 miles

engine and chassis covers fitted

Pass 11 Feb 2009 56,077 miles

How Reliable is the Mazda 5?

Based on 413,409 MOT tests across 26,269 vehicles.

70.3%
Pass Rate
7,199
Miles/Year
21
Year Lifespan
26,269
On UK Roads

Top MOT Failure Points

Shock absorber has a serious fluid leak 13,334
Tyre tread depth below requirements of 1.6mm 11,283
Windscreen wiper does not clear the windscreen effectively 8,696
Brake pad(s) less than 1.5 mm thick 7,218
Tyre has ply or cords exposed 6,761
Full Mazda 5 reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

FG06 CNC is a 2006 Mazda 5 in Grey with a 1,998cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 73.3%.

Across all 2006 Mazda 5 models, the average MOT pass rate is 69.6% with a typical mileage of 75,810 miles. This particular vehicle has performed better than the average for its year.

The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying FG06 CNC, it's worth having these areas checked by a mechanic before committing.

The Mazda 5 typically stays on UK roads for around 21 years. At 20 years old, this Mazda 5 is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of FG06 CNC?

You can check the full history of FG06 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was FG06 CNC registered?

FG06 CNC is a 2006 Mazda 5, first registered on 31 March 2006.

Is FG06 CNC safe to buy?

The MOT history for FG06 CNC shows 15 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does FG06 CNC have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FG06 CNC. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.