2006 Fiat Ducato

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chasis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chasis (5.3.6 (a) (i))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Lower Suspension arm pin or bush excessively worn front bush worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front and rear bushes (5.3.4 (a) (i))

Nearside Front suspension top bearing slightly noisey

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front and rear bushes (5.3.4 (a) (i))

Nearside Front suspension top bearing slightly noisey

Nearside Rear Nail in tyre 215/70 r15 c ()

exhaust system deteriorated

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength at rear mounting (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength at rear mounting (5.3.6 (a) (i))

Nearside Rear Nail in tyre 215/70 r15 c ()

exhaust system deteriorated

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Rear Body has slight corrosion crossmember (6.1.B.2)

exhaust deteriorated

both front antiroll bar bushes perishing

front wipers starting to smear

osf wing mirror glass cracked

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

nearside front tyre wearing close to tread wear indicators

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nearside front tyre wearing close to tread wear indicators

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)