2006 Fiat Ducato

Brake performance unable to be tested due to dangerous condition (1.2.1 (g))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Rear Leaf spring seriously weakened (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed/sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger/sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area (5.3.6 (a) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Brake prescribed area is excessively corroded crossmember/ brakepipe mounting (1.1.21 (e) (i))

Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))

Rear Exhaust system insecure hanger x2 (6.1.2 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps nearside and offside (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Track rod end modified such that the steering is adversely affected (2.1.3 (f) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mount/towbar holed (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger holed (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mount/towbar holed (5.3.6 (a) (ii)) DANGEROUS

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Side repeater lens defective which has no effect on emitted light missing (4.4.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Front Direction indicator slightly discoloured both (4.4.3 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced both jacking points (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on outer edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger near spring mount (5.3.6 (a) (i))

Offside Front Side repeater slightly discoloured (4.4.3 (a))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger near spring mount (5.3.6 (a) (i))

Rear Brake prescribed area is corroded but not considered excessive cross brace above axle to mount brake lines (1.1.21 (e) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced slam panel (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Chassis corroded, but not in any prescribed area

Offside Rear Chassis corroded, but not in any prescribed area

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Chassis corroded, but not in any prescribed area

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Chassis corroded, but not in any prescribed area

Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Central Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Central Vehicle structure is corroded but structural rigidity is not significantly reduced out riggers (6.1.1 (c) (i))

Front Direction indicator slightly discoloured both (4.4.3 (a))

Front Inner wheel arches corroded

Offside Rear inner wheel arch corroded

Offside Side repeater lens defective which has no effect on emitted light lens missing (4.4.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear slam panel (6.1.1 (c) (i))

Nearside Rear Leaf spring fractured (5.3.1 (b) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Central Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Central Vehicle structure is corroded but structural rigidity is not significantly reduced out riggers (6.1.1 (c) (i))

Front Direction indicator slightly discoloured both (4.4.3 (a))

Front Inner wheel arches corroded

Gearbox mounting defective ()

Offside Rear inner wheel arch corroded

Offside Side repeater lens defective which has no effect on emitted light lens missing (4.4.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear slam panel (6.1.1 (c) (i))

Front Direction indicator slightly discoloured both (4.4.3 (a))

Offside Front side repeater lens missing

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear slam panel slightly corroded

trailer electrics plug slightly insecure

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Front Direction indicator slightly discoloured both (4.4.3 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear registration plate lamp going dull

Windscreen damaged but not adversely affecting driver's view stone chips and cracked on the nearside (3.2 (a) (i))

engine appears to be slightly damp with what smells like fuel but no sign of an obvious leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Side repeater not working (1.4.A.2c)

Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint is insecure (2.5.C.1b)