2011 Volkswagen Polo

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sills bubbling (6.2.2 (d) (i))

Front Anti-roll bar linkage ball joint has slight play Both (5.3.4 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal Sill (5.3.6 (a) (i))

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sills bubbling (6.2.2 (d) (i))

Front Anti-roll bar linkage ball joint has slight play Both (5.3.4 (a) (i))

Nearside Front Road wheel fixing loose (5.2.1 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal Sill (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) DANGEROUS

Nearside Drag link end ball joint has slight play (2.1.3 (b) (i))

Offside Drag link end ball joint has slight play (2.1.3 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim too high and too far to the left. (4.1.2 (a))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Headlamp aim too high and too far to the left. (4.1.2 (a))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Play in steering rack inner joint(s) ()

Front both upper top mounts worn

exhaust back box corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Play in steering rack inner joint(s) ()

Front both upper top mounts worn

exhaust back box corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

rear exhaust back box corroded

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Play in steering rack inner joint(s) both inner rack joints ()

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) DANGEROUS

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Play in steering rack inner joint(s) both inner rack joints ()

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction Air freshener hanging from mirror (3.1 (a) (ii))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction Sticker across top of windscreen (3.1 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Hazard warning lamps inoperative (4.4.1 (e))

Offside Front Lower Suspension arm pin or bush excessively worn Rear bush on lower arm (5.3.4 (a) (i))

Offside Front Seat belt not functioning as intended Not retracting correctly (7.1.2 (c))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Position lamp lens seriously defective Broken and has sharp edges (4.2.1 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on edge (5.2.3 (e))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge Worn on edge (5.2.3 (e))

Offside Play in steering rack inner joint(s) ()

Offside Rear Quarter panel damaged

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Rear bumper cover damaged

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Nearside Front STEERING RACK END WORN

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front STEERING RACK END WORN

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

exhaust system corroded

engine covers and under trays fitted

engine covers and under trays fitted

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Side repeater not working (1.4.A.2c)

Offside Headlamp not working on dipped beam (1.7.5a)