2012 Vauxhall Combo

Anti-roll bar linkage ball joint has slight play both fronts (5.3.4 (a) (i))

Headlamp lens slightly defective both fronts faded (4.1.1 (b) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Road wheel slightly distorted both fronts (5.2.2 (c) (i))

exhaust rusty and peeling away

rusty under van

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Anti-roll bar linkage ball joint has slight play both fronts (5.3.4 (a) (i))

Headlamp lens slightly defective both fronts faded (4.1.1 (b) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Nail in tyre

Road wheel slightly distorted both fronts (5.2.2 (c) (i))

exhaust rusty and peeling away

rusty under van

Rear Coil spring corroded both rears (5.3.1 (b) (i))

exhaust box rusty and peeling away

headlamps faded

Nearside Side repeater not working (4.4.1 (a) (ii))

Rear Coil spring corroded both rears (5.3.1 (b) (i))

exhaust box rusty and peeling away

headlamps faded

Front headlights lens fading both sides

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair hand brake (1.2.1 (c))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front headlights lens fading both sides

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair hand brake (1.2.1 (c))

Rear Tyre slightly damaged/cracking or perishing both sides in treads (5.2.3 (d) (ii))

Offside Rear Exhaust silencer box getting rusty

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides starting to perish (5.3.4 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Exhaust silencer box getting rusty

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides starting to perish (5.3.4 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Tyre obviously under inflated pump up (5.2.3 (l))

Offside Rear exhaust system box getting rusty

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Exhaust emissions exceed manufacturer's specified limit limit 0.50 (8.2.2.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Reversing lamp inoperative (4.6.1 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear exhaust box outer skin corroded

horn has poor quality sound

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

front discs worn and lipped advise replace with pads

horn has poor quality sound