2003 Toyota Yaris

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Brake performance unable to be tested (1.2.1 (g))

Front Registration plate inscription missing (0.1 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

handbrake has high travel

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Windscreen wiper blade defective split (3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

corrosion to nearside and offside rear suspension arm mounting areas

rear number plate slight loose

rear tailgate struts worn

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

hand brake travel high

rear tailgate struts worn

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

hand brake travel high

rear tailgate struts worn

Central Rear Seat belt not functioning as intended not returning (7.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure inner sidewall split. dangerous (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both front headlamp lenses deteriorating

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

EML lamp on

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both front headlamp lenses deteriorating

centre rear seat belt slow to retract

corrosion to rear sill areas and rear subframe mounting areas

front wiper blades incorrectly fitted?

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Anti-roll bar linkage pin or bush excessively worn anti roll bar link pin (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement anti roll bar link pin (5.3.4 (a) (i))

centre rear seat belt slow to retract

corrosion to rear sill areas and rear subframe mounting areas

front wiper blades incorrectly fitted?

Rear Subframe mounting repair covered in underseal n/s + o/s (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Subframe mounting repair covered in underseal n/s + o/s (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear coil spring broken (2.4.C.1a)

Fuel Pipe/s corroded Filler neck and breather ()

Nearside Rear Body has slight corrosion Chassis at rear (6.1.B.2)

Offside Rear Body has slight corrosion Chassis rail at rear (6.1.B.2)

Rear axle corroded

Nearside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Headlamp aim too low and too far to the left. (1.8)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear suspension componants covereed in surfac e rust

Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Front anti roll bar link arm bushes perishing

Slight play in rear axle beam bushes.