MOT Status
ExpiredMileage
159,244 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and sill end. (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill. (7.1.1 (a) (i))
Offside Rear Lower Body panel corroded and likely to cause injury Door. (6.2.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill end and inner sill. (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm. (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Front Tyre worn close to legal limit/worn on edge 2.5mm. (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill to floor. (5.3.6 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Unable to fully inspect seat belt.
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill to floor. (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill to floor. (5.3.6 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Unable to fully inspect seat belt.
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill to floor. (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front brake back plate missing
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive n/s and of rear axle beam mounting area (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced n/s and o/s rear ends of chassie and holed / underside of vehicle corroded (6.1.1 (c) (i))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Front brake back plate missing
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive n/s and of rear axle beam mounting area (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced n/s and o/s rear ends of chassie and holed / underside of vehicle corroded (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
underside or vehicle has light corrosion
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
underside or vehicle has light corrosion
General corrosion to suspension components
General under body corrosion
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
General corrosion to suspension components
General under body corrosion
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
rusting to various prescribed areas
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Headlamp levelling device inoperative arm broken (4.1.5 (a))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Exhaust system insecure (6.1.2 (a))
Rear Registration plate inscription illegible (0.1 (b))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
rusting to various prescribed areas
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring broken (2.4.C.1a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FG58 AEM is a 2008 Honda Civic in Grey with a 1,799cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Honda Civic models, the average MOT pass rate is 74.7% with a typical mileage of 78,524 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying FG58 AEM, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 18 years old, this Honda Civic is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FG58 AEM?
You can check the full history of FG58 AEM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FG58 AEM registered?
FG58 AEM is a 2008 Honda Civic, first registered on 18 October 2008.
Is FG58 AEM safe to buy?
The MOT history for FG58 AEM shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FG58 AEM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FG58 AEM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.