MOT Status
ValidMileage
73,064 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle (5.3.6 (a) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Front Wing small hole due to corrosion
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Full outer sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Wing small hole due to corrosion
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Coil spring corroded (5.3.1 (b) (i))
Fuel filter corroded
Integral body structure is corroded but structural rigidity is not significantly reduced Underside and passenger side sill (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Fuel filter corroded
Integral body structure is corroded but structural rigidity is not significantly reduced Underside and passenger side sill (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust silencer slightly loose bracket broken (8.1.1 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Headlamp aim too low (4.1.2 (a))
Rear Exhaust silencer slightly loose bracket broken (8.1.1 (b) (i))
Nearside Front Brake pipe twisted (found during steering lock to lock check) (2.2.D.2b)
Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FG58 BVA is a 2008 Ford Ka in Blue with a 1,297cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FG58 BVA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FG58 BVA?
You can check the full history of FG58 BVA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FG58 BVA registered?
FG58 BVA is a 2008 Ford Ka, first registered on 30 September 2008.
Is FG58 BVA safe to buy?
The MOT history for FG58 BVA shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FG58 BVA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FG58 BVA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.