2014 Keeway Tx

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Stop lamp light intensity obviously reduced Only half working (4.3.3 (a) (i))

Exhaust system insecure Silencer bolt loose (6.1.2 (a))

Fuel cap ineffective Rubber Bradley deteriorated (6.1.3 (b) (i))

Headlamp aim not tested Due to headlight being insecure (4.1.2 (b))

Rear Brake pedal insecure Split pin missing (1.1.2 (e) (i))

Rear Footrest missing Both (6.2.12 (a))

Rear Tyre not fitted in accordance with side wall instructions Fitted wrong way round (5.2.3 (i))

Rear reflector missing (4.8.2 (a) (ii))

Suspension attachment bracket/mounting insecure Linkage bolt loose (5.3.3 (a) (i))

Suspension attachment bracket/mounting insecure Top yoke nut loose (5.3.3 (a) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Ignition switch loose bolt missing

Stop lamp light intensity obviously reduced Only half working (4.3.3 (a) (i))

Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))

Rear Footrest missing both (6.2.12 (a))

Rear Lower Suspension attachment bracket/mounting insecure linkage bolt missing (5.3.3 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

brake pedal split pin missing

fuel cap seal

Fuel cap ineffective seal missing (6.1.3 (b) (i))

Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly worn (3.2.A1l)

rear pegs missing

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel cap sealing washer deteriorated (7.2.2c)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake pedal pivots excessively worn (3.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension movement is excessively stiff (2.4.A.3b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

l/h/f switch gear loose on bars

rear pegs missing