2013 Vauxhall Antara

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Electronic parking brake control defective so that it cannot be satisfactorily operated (1.1.6 (d))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central propshaft removed

Front Suspension arm pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))

Front both front fogs not working

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bushes o/s and n/s rear (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement o/s and n/s rear lower arm bushes (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Windscreen wiper does not clear the windscreen effectively x 2 (3.4 (b) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Non obligatory mirror damaged ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Non obligatory mirror damaged ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit inner tread (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

engine covers and under trays obscuring inspection of some components

Nearside Front Tyre tread depth below requirements of 1.6mm inner tread (4.1.E.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Tyre worn close to the legal limit inner tread (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

engine covers and under trays obscuring inspection of some components