2004 Mazda Premacy

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner and outer sill and arch as marked (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel well as marked (6.1.B.2)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill and arch as marked (6.1.B.2)

Body has slight corrosion all (6.1.B.2)

Body has slight corrosion front cross member (6.1.B.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Shock absorber has slight corrosion to the casing all (2.7.2a)

Suspension arm corroded but not seriously weakened all (2.4.G.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill and arch as marked (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel welll as marked (6.1.B.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill as marked and arch (6.1.B.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Body has slight corrosion all (6.1.B.2)

Body has slight corrosion front cross member (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Shock absorber has slight corrosion to the casing all (2.7.2a)

Suspension arm corroded but not seriously weakened all (2.4.G.1)

Body has slight corrosion all (6.1.B.2)

Front Brake pad(s) wearing thin all (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Body has slight corrosion all (6.1.B.2)

Front Brake pad(s) wearing thin all (3.5.1g)

Both front brake pipes corroded.

Both rear brake discs excessively pitted.

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

CORROSION UNDERSIDE

Nearside Front Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Offside Front Tie bar/rod has slight play in a pin/bush (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

CORROSION UNDERSDE

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Bonnet catch is stiff

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Bonnet catch is stiff

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front and rear discs worn

both front wiper rubbers have small splits in the ends

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Tyre worn close to the legal limit (4.1.E.1)

Front Headlamp aim too low (1.8)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

brake disc slightly pitted (3.5.1h)