MOT Status
ExpiredMileage
81,431 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Oil leak ()
Rear Sub-frame has slight play in a pin/bush both sides (2.4.G.2)
Front Exhaust has a major leak of exhaust gases front pipe (7.1.2)
Nearside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Oil leak ()
Rear Sub-frame has slight play in a pin/bush both sides (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front coil spring broken (2.4.C.1a)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FH06 JXY is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FH06 JXY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FH06 JXY?
You can check the full history of FH06 JXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FH06 JXY registered?
FH06 JXY is a 2006 Ford Ka, first registered on 1 December 2006.
Is FH06 JXY safe to buy?
The MOT history for FH06 JXY shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FH06 JXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FH06 JXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.