2008 Toyota Aygo

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Headlamp aim too low adjusted and set to correct height (4.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge smooth inner and outer edges (5.2.3 (e))

Offside Front Headlamp aim projected beam image is obviously incorrect fitted bulb correctly (4.1.2 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. low effort (1.2.1 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. low effort (1.2.1 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre slightly damaged/cracking or perishing All 4 (5.2.3 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Indicator switch faulty (4.4.2 (a) (i))

Service brake binding but not excessively n/s/f and n/s/r (1.2.1 (f))

Tyre slightly damaged/cracking or perishing o/s/f and n/s/r perishing (5.2.3 (d) (i))

condensation in n/s headlamp

front brake discs corroded at edges of inner faces

rear tyres have age related cracking to sidewalls and tread area

Hazard warning lamps inoperative (1.4.B.1b)

condensation in n/s headlamp

front brake discs corroded at edges of inner faces

rear tyres have age related cracking to sidewalls and tread area

condensation in n/s headlamp

Windscreen washer provides insufficient washer liquid (8.2.3)

condensation in n/s headlamp

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp not working on dipped beam (1.7.5a)