2008 Toyota Aygo

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Exhaust has a minor leak of exhaust gases rear clamp (6.1.2 (a))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone rear bush (5.3.4 (a) (i))

under vehicle corrosion

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Exhaust has a minor leak of exhaust gases rear clamp (6.1.2 (a))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone rear bush (5.3.4 (a) (i))

under vehicle corrosion

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing cracking on outer edge (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing cracking on outer edge (5.2.3 (d) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Shock absorbers damaged to the extent that it does not function corroded (5.3.2 (b))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Shock absorbers has slight external damage to the casing due to corrosion (5.3.2 (b))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Shock absorbers has slight external damage to the casing due to corrosion (5.3.2 (b))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

eml on

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

eml on

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp not working on dipped beam (1.7.5a)