MOT Status
ExpiredMileage
182,087 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sills (6.1.1 (c) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced sill (6.1.1 (d) (i))
Nearside Rear Registration plate lamp throwing direct white light to the rear (4.7.1 (a))
Nearside Rear Wheel arch corroded but no sharp edges
Rear Suspension component mounting prescribed area is corroded but not considered excessive +Axel (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin close to MOT limits (1.1.13 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp levelling device inoperative (4.1.5 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin close to MOT limits (1.1.13 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Bumper corner damaged.
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Parking brake inoperative on one side Zero effort. (1.4.1 (a))
Nearside Rear Brake pipe excessively corroded At rear to flexi (1.1.11 (c))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Brake pipe excessively corroded At rear to flexi hose. (1.1.11 (c))
Offside Rear Brake pipe excessively corroded Flexi hose to cylinder. (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Bumper corner damaged.
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. imbalance (1.4.2 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))
Rear Brake pipe slightly corroded Both (3.6.B.2c)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)
Front Brake pad(s) wearing thin both (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
front brake discs showing signs of corrosion
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FH08 PLO is a 2008 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 76.5%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying FH08 PLO, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FH08 PLO?
You can check the full history of FH08 PLO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FH08 PLO registered?
FH08 PLO is a 2008 Toyota Aygo, first registered on 2 July 2008.
Is FH08 PLO safe to buy?
The MOT history for FH08 PLO shows 17 tests with a 76.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FH08 PLO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FH08 PLO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.